Featured Product

Indac Vineyard Post Caps

10% Off INDAC Vineyard Post Caps

 
 
 
 
 
 
 
 
 

$559.19

Rotomoulded polyethylene , heavy duty plastic toolbox 1600mm width, 600mm depth, 550mm height, Assembled with stainless steel fittings

These ultra-tough, sturdy utility boxes are built to take the knocks and keep coming back.

From:

Indac 1600 Toolbox

$199.18

Rotomoulded polyethylene, heavy duty plastic toolbox 600mm width, 300mm depth, 300mm height, Assembled with stainless steel fittings

These ultra-tough, sturdy utility boxes are built to take the knocks and keep coming back.

From:

Indac 600 Toolbox

$218.50

Site and safety box custom logo 3D squar

Have your company logo on the front lid of your own Site & Safety Box. Stand out and look professional.

From:

Custom Logo Site & Safety Box

$99.12

Document Box Open with FE-FA 3D square.j

Add a Fire Extinguisher and First-Aid Kit to your Document Box. Great for health and safety requirements.

From:

Fire Extinguisher & First-Aid

$400

Spill kit bucket 3D.jpg

These spill kits are a must have for every workshop. Everything you need to contain and clean up spills.

From:

Indac multi-purpose spill kit

$0.68

BSP Threaded driver plug, injection moulded from glass filled nylon

Indac BSP threaded driver plugs, used to install BSP Spinwelds, various sizes available.

From:

BSP Threaded Driver Plugs

$2.81

Spinweld Test Patch Cap, injection moulded from polyethylene

Specifically designed to cover test patch holes made during AS/NZ 4766 Tank Standard testing

From:

Spinweld Test Patch Cap

$5.99

Filler Diesel Rolled Thread spinweld injection moulded from polyethylene

A diesel filler spinweld to fit a rolled thread diesel cap 111A. Easily spinwelded into a tank. 

From:

Filler Diesel Rolled Thread

$4.13

American Buttress Filler threaded spinweld injectin moulded frompolyethylene

American Buttress Filler threaded spinweld, available in 56mm and 88mm sizes.

From:

American Buttress Filler

$32.69

Spin Slick Spinweld lubricant, trigger spray bottle

Spin Slick is the easy way to come unstuck, no more sticky bits in unwanted places.

From:

Spin Slick

$POA

Carrera base and signboard assembly.jpg

Carrera signs have been designed with pedestrian safety in mind. ACM or PVC sign panels available.

From:

Carrera Freestanding Sign

$18.76

EZY TAP 3D Sized.jpg

Ezytaps are easily fitted from the outside of tank or vessel, a range of common sizes is available.

From:

EZYTAP 

$67.12

34 Inch BSP Bung 3D square.jpg

The ¾” BSP Plug is designed to plug  a ¾” threaded hole. Easily installed or removed with the key spanner.

From:

3/4" BSP Plug

$36.31

Bucket 20 Litre heavy duty polyethylene stainless steel handle

A heavy duty 20 litre bucket with a stainless steel handle. Avaiable in a range of colours.

From:

Heavy Duty 20 Litre Bucket

$42.53

Tray 27 Litre rotomoulded from polyethylene plastic

A handy tray for storing all your small items, made from heavy duty polyethylene plastic.

From:

Tray 27 Litre

$29.30

Tote Bin 23 Litre 3D sized.jpg

A 23 Litre Tote bin that is seamless for easy clean and nestable for convenient storage

From:

Tote Bin 23 Litre

$71.31

Stack and Nest bin 45 L Sized.jpg

A 45 Litre Stack and nest bin that is seamless for easy cleaning, light weight and easy to handle.

From:

Stack and Nest Bin 45 Litre

$85.07

Trough 115 Litre rotomoulded from UV resistant plastic suitable for New Zealand environmental conditions

A 115 Litre Trough rotomoulded from UV resistant plastic suitable for New Zealand environmental conditions.

From:

Water Trough 115 Litre

$800.19

Pallet Bin 720 Litre made from UV resistant polyethylene, forklift entry points, forklift tippable, stackable for storage

A 720 Litre bin, forklift tip-able, stack-able for easy storage, made from UV resistant polyethylene.

From:

Pallet Bin 720 Litre

$792.91

1000 litre bin twin walled forklift entry

A 1000 litre, uninsulated twin wall bin, made from UV resistant polyethylene.

From:

 Storage Bin 1000 Litre

$175.00

Conical storage tank rotomoulded from polyethylene plastic

Indac produces a selection of conical tanks, threaded fiitings can be spinwelded to outlet.

From:

Conical Storage Tanks

$POA

Water storage Tank Curved rotomoulded from polyethylene plastic

Indac produces curved storage tanks, these have been designed to fit into boats.

From:

Curved Storage Tanks

$8.22

RJT Cap injection moulded from ABS

Economic replacement for stainless steel caps, available in 2" and 3" red and blue ABS.

From:

RJT Caps

$POA

Vine Stripper Retainer Button injection moulded from polyethylene plastic

Wire lifting made simple for your vineyard, Fixes to corners of quarter round posts.

From:

Vineyard Stripper Button

$156.55

Marker Buoy 400 marine buoy rotomoulded from uv stabilised medium density polyethylene

The marker buoy 400 is a marine buoy which can have graphics applied to suit your requirements

From:

Marker Buoy 400

$POA

Top Marker for the marker buoy 500 marine buoy

The top markers for the marker buoy 500 come in North, South, East and West. Other markers available.

From:

Marker Buoy 500 top markers

$POA

Special mark assembled 3D square.jpg

Special Marker for marine navigation, comes in standard Yellow, mount this to one of our marker buoys.

From:

Special Marker

$167.36

Low Profile Float 180kg buoyancy

Moulded from UV stabilised medium density polyethylene, suitable for New Zealand environmental conditions.

From:

Low Profile Float

$216.27

1000 litre float rectangular 3D Square.j

This Float is for Marina Flotation, Floating Submersible Pumps, Recreational Platforms.

From:

1000 Litre Rectangular Float

$62.53

Trawl Float 380mm rotomoulded from uv stabilised polyethylene

Moulded from UV stabilised medium density polyethylene, suitable for New Zealand environmental conditions.

From:

Trawl Float 380mm

$67.40

Salmon Feeder SF25 with lid for feeding dry food to salmon rotomoded from polyethylene plastic

This Salmon feeder will hold 25Kg of dry food, easily mounted and moved about the farm to feed your fish.

From:

Salmon feeder 25KG

$33.01

Pile Cap 465mm for use on marina piles rotomoulded from polyethylene plastic

A pile cap for 465mm piles, moulded from UV stabilised polyethylene to withstand the environment.

From:

Pile Cap 465mm 

$POA

Marina Grease Cap rotomoulded from uv stabilised polyethylene

A Marina grease cap, moulded from UV stabilised polyethylene to withstand the environment.

From:

Marina Grease Cap

$23.39

Protective Bin Lid 470mm rotomoulded from polyethylene plastic

A protective bin lid of 470mm diameter made to keep whats in your bin protected.

From:

Protective Bin Lid 470mm

$65.00

Technovent Is constructed from tough cast stainless steel, and will probably last longer than you do

Technovent provides a simple method of attaching low pressure compressed air lines to moulds.

From:

Technovent

$450.47

Rotomoulded polyethylene , heavy duty plastic toolbox 1200mm width, 600mm depth, 490mm height, Assembled with stainless steel fittings

These ultra-tough, sturdy utility boxes are built to take the knocks and keep coming back.

From:

Indac 1200 Toolbox

$158.38

Rotomoulded polyethylene, heavy duty plastic toolbox 400mm width, 250mm depth, 300mm height, Assembled with stainless steel fittings

These ultra-tough, sturdy utility boxes are built to take the knocks and keep coming back.

From:

Indac 400 Toolbox

$218.50

Site and Safety Open with FE-FA 3D squar

Add a Fire Extinguisher and First-Aid Kit to your Site & Safety Box. Great for those small emergencies. 

From:

Fire Extinguisher & First-Aid

$99.12

Lockable Document Box 3D.jpg

Keep your Documents safe with our Lockable Document box. Great for health and Safety requirements.

From:

Indac Lockable Document Box

$0.53

Spinweld cap, injection moulded from polyethylene

Indac Spinwelds, easy install, easy clean up, no fuss, various colours and sizes available.

From:

Spinweld Caps

$6.55

Two Start Threaded spinweld, injection moulded from polyethylene

Indac Two start threaded spinwelds are designed to fit PVC pipe, comes in 90mm and 100mm

From:

Two Start Threaded Spinwelds

$2.81

½_inch_Spinweld_with_6mm_insert_3D_Squar

A 1/2" Spinweld with a Female threaded Stainless Steel Insert. Available in M6 & M8 thread.

From:

Spinweld with Stainless Insert

$5.07

Buttress style threaded fitting, injection moulded frm polyethylene

The Buttress style threaded spinweld is produced from UV stabilised medium density polyethylene.

From:

Buttress Style Threaded Fitting

$7.03

American Buttress Filler Cap injection moulded from nylon

American Buttress Filler threaded cap with sealing washer to fit the filler, available in 56mm and 88mm sizes.

From:

American Buttress Filler Cap

$50.00

Spinweld Driver Disc fro installing spinwelds, injection moulded from glass filled nylon, square drive router bit fittment hole pattern to fit multiple spinwelds

The Driver disc is used to spinweld our larger spinweld fittings such as the two start fittings.

From:

Spinweld Driver Disc

$POA

HSL600 Complete.jpg

HSL signs have been designed with pedestrian safety in mind. ACM or PVC sign panels available.

From:

HSL Freestanding Sign

$7.32

Wallace Seal tank seal for low pressure pipe fittings, injection moulded from PVC

Wallace seals Create a semi-flexible joint between pipe and tank and are available in a range of sizes.

From:

Wallace Seal

$67.12

34 Inch BSP Bung Spanner 3D square.jpg

The ¾” BSP Plug spanner is designed for easy install and removal of the ¾" BSP Plug.

From:

3/4" BSP Plug Spanner

$12.44

Parts Tray rotomoulded from polyethylene plastic

A handy parts tray for storing all your small items, made from heavy duty polyethylene plastic.

From:

Parts Tray

$29.30

Utility Bin 8 litre rotomoulded from polyetylene plastic

A Utility Bin with 8 Litres capacity, nestable for easy storage, a range of colours available.

From:

Utility Bin 8 Litre

$29.30

Tote Bin 35 Litre 3D sized.jpg

A 35 Litre Tote bin that is seamless for easy clean and nestable for convenient storage

From:

Tote Bin 35 Litre

$53.86

Bin 40 Litre rotomoulded from poyetylene plastic

A 40 litre Bin that stack for easy storage, seamless for easy cleaning, a range of colours available.

From:

Bin 40 Litre

$POA

Dimensions 1050mm x 1050mm x 800mm (L x W x H)

A 635 Litre storage bin, forkliftable, made from UV resistant medium density polyethylene.

From:

Storage bin 635 Litre

$POA

Storage Bin 1050 Litre Complete 3D squar

A 1050 Litre bin, made from UV resistant polyethylene. Ideal for the transportation of products.

From:

Storage Bin 1050 Litre

$207.08

Water storage tank rectangular rotomoulded from polyethylene plastic

Indac has a selection of rectangular storage Tanks, rotomoulded for a seamless tank.

From:

Rectangular Storage Tanks

$207.08

Water storage Tank Angled rotomoulded from polyethylene plastic

Indac has a great selection of angled storage Tanks, rotomoulded for a seamless tank.

From:

Angled Storage Tanks

$POA

Water storage Tank Round rotomoulded from polyethylene plastic

Indac produces curved storage tanks, these have been designed to fit into boats.

From:

Round Storage Tanks

$188.03

Vineyard Net Reel netting storage rotomoulded from polyethylene plastic

Vineyard net reels assist with the retrieval, storage and application of bird netting in vineyards

From:

Vineyard Net Reel

$POA

Wine Vat Lid Spacer rotomouled from polyethylene

Easy to use enabling tank ventilation, constructed from food grade heavy duty polyethylene.

From:

Wine Tank Lid Spacer

$397.41

Marker Buoy 500 marine navigation buoy rotomoulded from uv stabilised polyethylene

The marker buoy 500 is a marine buoy which can have navigational markers fitted

From:

Marker Buoy 500

$POA

Port Marker 3D Sized.jpg

Port Marker for marine navigation, comes in standard Red, mount this to one of our marker buoys.

From:

Port Marker

$POA

Radar Reflector 3D semi square.jpg

Radar Reflector for our Marker Buoy 500, mount this to make the marker buoy detectable by radar.

From:

Radar reflector

$216.27

Marina Float used to build floating marina's rotomoulded from uv stabilised polyethylene

The Marina Float is a stable and rugged pontoon used in floating walkways, jetties, diving platforms.

From:

Marina Float

$31.10

Surface Float 300mm rotomoulded from uv stabilised polyethylene

Moulded from UV stabilised medium density polyethylene, suitable for New Zealand environmental conditions.

From:

Surface Float 300mm