Vineyard Stripper retainer button

Vineyard Stripper Retainer Button

  • Wire lifting made simple
  • Handles retainer/wire misalignment of 14 degrees
  • Fixes to corners of quarter round posts
  • Takes 5mm nails
  • Rotate 90 degrees and retainer becomes an easy lift button
  • Click here for PDF of line drawing
  • Features

    • The introduction of overhead vine stripping requires the installation of a secure retaining system for the top wire.
    • The VSR (Vine Stripper Retainer) button has been developed to give the holding power to resist the 160kg plus pull exerted by the mechanical strippers.
    • Better than wire on nails no loss of zinc coating when wind vibrates wires
    • Still gives access to wire if hammered home.
    • ‘Tek ‘screw to steel posts.
    • One retainer nailed on square does the job for flat and undulating ground.
    • Dimensions: 30mm Diameter x 15.5mm with 5mm Nail Hole.

     

    Specification

     

    Code

    Description

    Wire Diameter

    Qty per Bag

    Qty per Carton

    VSRBB  

    Vine Stripper Retainer Button

    2.5mm

    1000

    3000 (3xBags)

    VSRB2.3   

    Vine Stripper Retainer Button

    2.3mm

    1000

    3000 (3xBags)