Injection moulded BSP threaded driver plug for fitting Indac bsp spinwelds

BSP Driver Plug

  • BSP threaded plug made from glass filled nylon, used on its own it's a dust cap or add an O-Ring to make it watertight.
  • Used as a driver to install the BSP spinwelds.
  • Colour: Black
  • Alt colours available - minimum quantity may apply.
  • Click here for PDF of line drawing
  • Features

    • The Indac Driver Plugs are produced from 30% Glass Filled Nylon, ‘O’ rings made from ethylene propylene rubber are available for each size driver plug.
    • Driver plugs can be used as a dust cap or if fitted with an EPR ‘O’ ring giving maximum UV protection for a water tight seal.
    • The driver plug simply screws into the fitting, the square drive router bit which we can supply fits the driver plug.
    • Leave the driver plug inserted to prevent contaminants entering the tank during transport or storage.

     

    Specification

     

    Code

    Description

    Dia Metric

    Dia Imperial

    XSWDP12

    Spinweld Driver Plug ½”    BSP (15mm)

    15mm

    ½ Inch

    XSWDP34

    Spinweld Driver Plug ¾”    BSP (20mm)

    20mm

    ¾” Inch

    XSWDP1

    Spinweld Driver Plug 1”     BSP (25mm)

    25mm

    1 Inch

    XSWDP114

    Spinweld Driver Plug 1 ¼” BSP  (32mm)

    32mm

    1 ¼ Inch

    XSWDP112

    Spinweld Driver Plug 1 ½” BSP  (40mm)

    40mm

    1 1/2 Inch

    XSWDP2

    Spinweld Driver Plug 2”     BSP (50mm)

    50mm

    2 Inch